Tel: 886.909 602 109 Email: [email protected]
13
Fig.4 Removal of 6 fixing screws
3. Separate S3302 front casing from its rear casing (Attention: In this case, two parts of the casing are
connected by multiple cables, do not separate the casing forcibly). Firstly, remove one end of the
interconnecting cable between the front and rear casings, and then place them on the table. In case of
reassembly, pay attention to the relationship of the connection cables, as shown in the following figure.
Fig.5 Connection cables between the front and rear casings
