KEY DIAGRAM
1
2
3
4
4.
Ceramic Coated Plates
3.
Swivel Cord
2.
ON/OFF Switch
1.
Vent Holes
IMPORTANT INFORMATION
•
Ensure that your hair is clean and tangle free.
•
If you normally use a heat protection or iron oil spray, this can be applied now before
combing or brushing through hair to remove snags and tangles.
•
The appliance has been designed so that as well as being able to be used as a dry hair
straightener, it can also be used prior to blow drying on towel-dried hair. After
washing and conditioning as normal, dry hair with a towel ensuring no dripping water
remains in the hair.
•
Only hold the appliance by the handle. Avoid touching the hot plates
•
Do not scratch the surface of the plates as this will decrease the effectiveness of the
ceramic coating.
INSTRUCTIONS FOR USE
•
The Straightener automatically adjusts to international voltage 100-120v / 220- 240v.
•
After plugging in the appliance, switch on. The power indicator will light up
reminding you that the straightener is on. It will take about 1 minute for the appliance
to heat up to the ideal temperature for carrying out styling.
•
To make styling easier, section the hair with clips or hair-bands. Please note that these
are not included with the product.
•
For best results, apply any styling products prior to straightening.
•
Always start at the back of the neck, working up the sides and towards the crown.
Finish with the hair at the front.
•
Always straighten the lower layers first.
3
