background image

 

 

Lower the support arm by pressing the detachment button, hold the mixer stand in one 

hand and pull the mixer body up with the other, sliding it forward at the same time. 

 

(Refer Fig. 6) 

 

CLEANING AND MAINTENANCE 

 

This appliance is for household use only and is not user-serviceable.  

 

Do not open or change any parts by yourself. Please refer to a qualified electrical service 

department or return to the supplier if servicing is necessary. 

 

Always remember to unplug the unit from the electrical outlet when not in use and before 

cleaning. Ensure that the speed control is set to “0”.  

 

It is much easier to clean the accessories directly after they have been used. Wash them in 

warm, soapy water, rinse and dry well. 

 

The body of the appliance and the stand should be cleaned with a damp cloth. Do not let 

water enter the appliance or the stand. 

 

Do not use bleach or other abrasive substance or solvents to clean your appliance as it can 

be damaging to the finish. 

 

The beaters and dough hooks and bowl can be cleaned in the dishwasher. 

 

Do not immerse the mixer in water or any other liquid, or hold it under a running tap to 

clean. 

 

To remove stubborn spots/marks, wipe the surfaces with a cloth slightly dampened in 

soapy water or mild non-abrasive cleaner. Rinse and dry a clean, dry, soft cloth. 

 

STORING THE APPLIANCE 

 

Unplug the unit from the wall outlet and clean all the parts as instructed above. Ensure 

that all parts are dry before storing.  

 

Store the appliance in its box or in a clean, dry place.  

 

Never store the appliance while it is still wet or dirty. 

 

Never wrap the power cord around the appliance. 

 

 

 

 

Summary of Contents for SSBM07











Reviews: