7
Turbo Button
If at any time you require a momentary speed increase, press the turbo button. This
function is also suitable for ingredients requiring short mixing periods.
The turbo button can be used intermittently for momentary boosts of power by holding
the button pressed down for a few seconds. Do not use this function for more than a
minute at a time.
Note
: The turbo boost can be applied at any time, regardless of speed setting.
STAND WITH PLASTIC MIXING BOWL
The stand with the bowl is used in combination with the beater and dough hook accessories. Care
should be taken to heed all safety and usage instructions concerning this appliance.
Caution
The stand should NEVER be submerged in water or held under a running tap. To clean,
simply wipe the unit with a damp cloth.
To fix the mixer into the supporting arm follow the instructions below:
Ensure that the appliance is unplugged and that the speed control is set to the “0”/off
position.
Place the mixer supports above the rear end of the support arm, press down gently and at
the same time, slide the mixer, inserting the support’s catches into the mixer’s side slots.
Once inserted, press down to fix the mixer firmly in place. (Refer Fig. 4).
Lift the support arm, with the mixer attached, to the highest position and then insert the
dough hooks or beaters as described above.
Place the bowl, with the ingredients inside, onto the base of the stand.
To lower the support arm, press the detachment button (Refer Fig. 5)
To disassemble, follow the instructions below:
Turn the speed control to “0” and unplug the appliance.
Raise the support arm and press the eject button to remove the accessories.
