10. Disconnect the iron from mains power supply outlet.
11. Hold the iron horizontally over a sink.
12. Push the Steam Knob to the MAX/ Self Cleaning position and gently shake the iron
to and fro.
13. Steam and boiling hot water will emit from the holes on the soleplate which
contains impurities, scale, minerals and flakes (if any) that deposited in the Steam
Chamber from previous use.
14.
Push the Steam Knob back to the “0” position as soon as all the water in the tank
has been used up.
15. Repeat the self-cleaning process if the iron still contains a lot of impurities.
16. After the self-cleaning process, put the plug into the wall socket, set the temperature
dial to the
MAX
position and let the iron heat up to allow the soleplate to dry.
17. Turn the temperature dial to the
“0”/ “OFF”/ “MIN”
position and unplug the iron
when it has reached the set ironing temperature.
18. Move the hot iron over a piece of used cloth to remove any water stains that may
have formed on the soleplate.
19. Let the iron cool down before you follow storage instructions.
Caution:
Keep skin/body away from the hot water.
* Products returned under warranty with faults due to scale will be subject to a
repair charge.
CLEANING AND MAINTENANCE
After using, lift the iron with the water inlet filling hole downwards to empty the
remaining water from the water tank into the sink.
Insert the plug into the socket and set the temperature dial to
MAX
for 1-2 minutes
to evaporate the remaining water. Once done, turn the dial to
“0”/ “OFF”/ “MIN”
,
unplug the iron and let it cool down before storing it.
This appliance is for household use only and is not user-serviceable.
Do not open or change any parts by yourself. Please refer to a qualified electrical
service department or return to the supplier if servicing is necessary.
