NovaChat User’s Guide
260
No Speech
Check the volume control on the edge of device. If that is not the
problem, choose
Menu
> Settings > Speech Output
and make sure
Speech Off is not checked.
No Speech and the message is not going to the Speech Display Bar
when pressing buttons
This can be caused if a dwell time has been added. To check the
timing, choose
Menu
>
Settings
>
Input
>
Timing
and check to see if
an Acceptance or Release time has been set.
No Speech in ChatEditor
When you install ChatEditor, the following message appears:
Speech is currently disabled.
Please connect a NovaChat/ChatFusion device to this computer to enable speech.
Choose
OK
to close the message. To enable speech in ChatEditor,
simply connect a USB cable between your computer and your
device. Test the Editor to verify that speech is working. Then
disconnect the cable.
Symbols Do not Display in ChatEditor
When you install ChatEditor, the following message appears:
You must attach a PCS-configured NovaChat Device to enable and display PCS Symbols.
Click OK to continue.
Choose
OK
to close the message. To enable symbols in ChatEditor,
simply connect a USB cable between your computer and your
device.
Test the Editor to verify that symbols are displaying. Then
disconnect the cable.
Texting conversations page doesn’t show any conversations
Make sure the setting “Use with Phone” is turn on. On the device,
choose
Menu
>
Settings
>
System
>
Bluetooth settings
. Make sure
that
Use with Phone
is selected.
