OWNER’S MANUAL V072023 ENGLISH
M-8370 TREADMILL FAST-70
This manual can be downloaded on
www.salter.es
6.2
Buttons
1,”Program” button: While in stop state, press the Program key can recycling Program 01-...-P06-HP1-HP2-
HP3-FAT.
2,”Start” button : When the power is on and the safety lock is pushed, press this button to start the running
of the treadmill.
3,"Stop" button: During excise, press this button to stop the treadmill and reset.
4, "Speed " and "Speed button -" are Speed adjust button:When in standby mode, press these
buttons to adjust the set point. When in “start” mode ,press these buttons to adjust speed, the adjustment
value for every 0.1 KM/H, when continues to hold over 0.5 seconds automatically continue increasing or
decreasing.
5, "Incline +", "Incline -" for the incline switch: When in standby mode, press these buttons to adjust the set
point. When in start mode,press these buttons to adjust the incline,the value is 1 grade/time, when
continues to hold over 0.5 seconds will be automatically continue increasing or decreasing.
6, Intermediate keyboard shortcut: "0,l,2,3,4,5, 6,7,8,9, speed, incline for the shortcut combination of input
keys. During operation, speed and incline can be set quickly. Set only integer bits, not decimals (1, 2, 3, 11,
etc.); In this way, when the setting is 12km, just press 1, then press 2, speed,it can work at 12km/h; incline
degree is set as above method; Running speed, incline value exceeds the maximum value is invalid. When
setting its parameters, press "speed" or "incline" to confirm the setting value.
7, “Cool Down”:It is only used in manual mode. When press this button, if the current speed is ≥8km/h, it
takes 3 minutes from slow down to stop. If ≤8km/h,
＞
2.5km/h, it takes 2 minutes from slowdown to stop. If
＜
2.5km/h, it takes 18 seconds. If press the ‘Cool Down”,the screen shows the arrows,the speed could only
increase.
8.”Half Marathon”:When in standby mode,press this button to enter the mode of half marathon.
9.”Marathon”:When in standby mode,press this button to enter the mode of marathon.
6.3 Incline/speed quick acces
0,1,2,3,4,5,6,7,8,9, incline, speed as hotkey combination: Press these keys to access to the desired speed or
incline without using "I", "Incline-", "Speed +", "Speed-" keys. To do this, during training or in the
standby mode, type the speed with the numbers and press Speed; Type incline and press Incline.
6.4
Quick start (manual mode)
Turn on the power switch and keep the safety lock adsorbed in the panel at the bottom of the safety lock
position.
Press the "start" key, the system enter into three seconds countdown, buzzer sound, at the same time speed
window shows the countdown. After 3 seconds, the treadmill running at a speed of 1.0 KMH.
After start, press "speed +", "speed -”to adjust the speed of the treadmill, Press “i” and “incline -” to
adjust the incline.
