OWNER’S MANUAL V072023 ENGLISH
M-8370 TREADMILL FAST-70
This manual can be downloaded on
www.salter.es
6.5
The operation during exercise:
1.Press the "speed -" key will reduce the speed of the treadmill
2. press the "Speed+" key will increase the speed of the treadmill.
3.Press the "Incline -" key will decrease the incline of the treadmill.
4.Press the “incline "+" key will increase the incline of the treadmill.
5.Press “Stop”,the treadmill will be slowdown until to stop running.
6.When the user hold the hand pulse sensor for around 3 seconds,the heart rate data will display.
6.6 PROGRAMS
OPERATION
1. Manual mode:
1) In the standby mode, press the START key to start the training in a quick way, without presetting
the value of time, distance or calories. The console will initiate a count up of all parameters.
2. Time countdown mode:
1) When the machine is standby, press the ”Program” key one time, the time window will flicker.
Press Speed+/- to adjust the countdown parameters. Setting range 5:00---99:00 minutes, press the
button once is 1:00 min.
2) Press the start button. When the set value of TIME counts down to zero, the machine stop
running. It will automatically change back to manual mode.
3. Distance countdown mode
:
1) When the machine is standby, press the ”Program” key twice time, the time window will flicker.
Press Speed+/- to adjust the countdown parameters. Setting range 0.5---99:00 minutes, press the
button once is 0.1km.
2) Press the start button. When the set value of distance counts down to zero, the machine stop
running. It will automatically change back to manual mode.
4. Calorie countdown mode
:
1) When the machine is standby, press the ”Program” key triple time, the time window will flicker.
Press Speed+/- to adjust the countdown parameters. Setting range 20-990. Press the button once is
10cal.
2) Press the start button
.
When the set value of calorie counts down to zero, the machine stop
running. It will automatically change back to manual mode.
BUILT-IN PROGRAM: P1-P6
This system has 6 built-in programs P1- P6. In the standby mode, press the "program" key, the distance
window of auxiliary window displays "P1-P6", dot matrix screen display "PROGRAM 1" to "PROGRAM 6".
After that, show speed mode and incline mode, the first row shows the speed mode, second rows show the
incline. After selecting the program, at the same time, the time window of auxiliary window flashing; display
preset time 30:00, "", "Incline-", "speed +", "speed-" set the desired motion of time, and then press
the "start" button to start the built-in program. The built-in program is divided into 16 sections, each section
of the movement time = set time /16. Speed, program each segment of incline as shown in the following
table, when the program runs to the next section of auxiliary window incline and speed window will show
the next segment of incline and speed value, issued at the same time of 4 tones "Be---", after entering the
next section, the speed will be the default rate recovery into the program. Time countdown to 0, the
program ends. At the same time to make a continuous "Be---" sound prompt. At the tone after the end, is
automatically transferred to the relaxation exercise, speed of speed program data last half. This mode of
running 2:30, buzzer sound 3 sounds, the motor stops running.