OWNER’S MANUAL V072023 ENGLISH
M-8370 TREADMILL FAST-70
This manual can be downloaded on
www.salter.es
7.2 TREADMILL FEET ADJUSTMENT (LEVELING)
Sometimes floor surfaces are not level or even. So once your treadmill has been positioned in your floor,
take the time to ensure that it is stable. If necessary, adjust the height of the stabilizer located underneath
the treadmill (4 adjustable stabilizers) by turning it clockwise or counterclockwise to either lower or raise the
machine.
7.3 BELT TENSION
If the running belt feels as though it is slipping‖ or hesitating when you plant your foot during a run, the
tension on the running belt may have to be increased.
1. Place a wrench on the left belt tension bolt. Turn the wrench clockwise 1/4 turn to draw the rear roller
and increase the belt tension.
2. Repeat STEP 1 for the right belt tension bolt.
3. Repeat STEP 1 and STEP 2 until the slipping is eliminated.
NOTE:
Be careful not to tighten too much the belt as it may damage the equipment. To decrease tension,
repeat steps 1, 2 and 3 counter clockwise.
