OWNER’S MANUAL V112019 ENGLISH
M-9590 RECUMBENT BIKE KOR
This manual can be downloaded from the customer area on
www.salter.es
ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Do not dispose of the
packing materials until assembly is completed. Read each step carefully before beginning
.
STEP 1 – Leveler & Stabilizer Assembly
a. Attach 4pcs
Levelers (106)
to the
Front Stabilizer
(103)
and the
Rear
Stabilizer (107).
b. Be sure to tighten the
Levelers (106)
securely against the
Stabilizers
(103,107)
until screw lines are eliminated as the
drawing 1
shown on
the top right corner.
STEP 2 – Stabilizer Assembly
a. In order to assemble the
Stabilizer (103,
107)
smoothly, it is suggested to place one
Styrofoam (or any stationary object) under
one side of the
Main Frame (1)
that is going
to assemble the stabilizer.
b. Attach the
Front Stabilizer (103)
and the
Rear Stabilizer (107)
onto the
Main Frame
(1)
and secure with the
Washers (8x38x2.0t)(120),
the
Lock Washers
(M8)(118)
and the
Bolts (M8xp1.25x60mm)(162)
by using the socket wrench. NOTE: If the item is not level,
review the
LEVELING NOTE
on the right side to level the
Levelers (106).
Detailed Lever- drawing 1
Detailed Lever- drawing 2
Stabilizer
Adjustment Plate
Leveler (106)
Adjustment Plate
Stabilizer
Screw line
Leveler (106)
LEVELING: After placing the bike in
the intended location for use, check
the stability of the bike. If the bike is
not level, reviewing the following
direction:
Loosen the Leveler (106) to make
the Adjustment Plate become less
tight.
Adjust the Leveler (106) for leveling.
Tighten the Adjustment Plate
securely against the Stabilizer to
lock the Leveler (28) in stable
position as the drawing 2 shown.
