OWNER’S MANUAL V122022 ENGLISH
M-9690 RECUMBENT BIKE FENX
This manual can be downloaded on
www.salter.es
5. ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Do not dispose of the
packing materials until assembly is completed. Read each step carefully before beginning
.
STEP 1 – Leveler Assembly
a. Attach 4pcs Levelers (106) to the Front Stabilizer (103) and the Rear
Stabilizer (107).
b. Be sure to tighten the Levelers (106) securely against the Stabilizers
(103,107) until screw lines are eliminated as the drawing 1 shown on the
top right corner.
STEP 2 – Stabilizer Assembly
a. In order to assemble the Stabilizer (103,
107) smoothly, it is suggested to place one
Styrofoam (or any stationary object) under
one side of the Main Frame (1) that is going
to assemble the stabilizer.
b. Attach the Front Stabilizer (103) and the
Rear Stabilizer (107) onto the Main Frame (1)
and secure with the Washers (8x38x2.0t)(120), the Lock Washers
(M8)(118) and the Bolts (M8xp1.25x60mm)(162) by using the socket wrench. NOTE: If the item is not level, review
the LEVELING NOTE on the right side to level the Levelers (106).
Detailed Lever- drawing 1
Detailed Lever- drawing 2
Stabilizer
Adjustment Plate
Leveler (106)
Adjustment Plate
Stabilizer
Screw line
Leveler (106)
LEVELING: After placing the bike in
the intended location for use, check
the stability of the bike. If the bike is
not level, reviewing the following
direction:
Loosen the Leveler (106) to make
the Adjustment Plate become less
tight.
Adjust the Leveler (106) for leveling.
Tighten the Adjustment Plate
securely against the Stabilizer to
lock the Leveler (28) in stable
position as the drawing 2 shown.
