OWNER’S MANUAL V122022 ENGLISH
M-9690 RECUMBENT BIKE FENX
This manual can be downloaded on
www.salter.es
3. HARDWARE IDENTIFICATION CHART
Unpack the box in a clear area. Use the List of Hardware below to check the contents of the hardware kit. This
chart is provided to help identify the hardware used in the assembly process. Place the washers, the end of bolts,
or screws on the circles to check for the correct diameter. Use the ruler to check the length of the bolts and screws.
NOTICE:
The length of all bolts and screws except those with flat heads is
Please review below to know the content of the hardware kit. Some small parts may have been pre-attached for
shipping. If a part is not in the hardware bag, check to see if it has been pre-assembled.
162 Bolt, Hex Head (M8xp1.25x60mm) 4pcs
182 Self-Tapping Screw, Flat Head (M4x32mm) 4pcs
151 Bolt, Socket Head (M8xp1.25x50mm) 2pcs
168 Bolt, Hex Head Flange (M10xp1.5x20mm) 2pcs
118 Lock Washer (M8) 6pcs
120 Washer (8x38x2.0t) 4pcs
133 Nylon Nut (M10xp1.5) 2pcs
183 Nut Cap (M8) 1pcs
181 Self-Tapping Screw, Flat Head (M4x20mm) 2pcs
147 Screw, Round Head (M5xp0.8x15mm) 5pcs
150 Screw, Round Head (M6xp1.0x15mm) 4pcs
167 Bolt, Hex Head Flange (M8xp1.25x16mm) 9pcs
