USER’S MANUAL V072023 ENGLISH
M-8385 TREADMILL
This manual can be downloaded on
www.salter.es
7.3 BELT TENSION
If the running belt feels as though it is slipping‖ or hesitating when you plant your foot during a run, the
tension on the running belt may have to be increased.
1. Place a wrench on the left belt tension bolt. Turn the wrench clockwise 1/4 turn to draw the rear roller
and increase the belt tension.
2. Repeat STEP 1 for the right belt tension bolt.
3. Repeat STEP 1 and STEP 2 until the slipping is eliminated.
NOTE:
Be careful not to tighten too much the belt as it may damage the equipment. To decrease tension,
repeat steps 1, 2 and 3 counter clockwise.
7.4 CENTRING THE RUNNING BELT
Sometimes the way of running of the user or the unevenness of the surface can decentralize the band.
Always check that the belt is centered.
To align the band, follow the next steps.
1.
Put the speed of the treadmill at 5 km/h.
2.
Observe whether the running belt is toward the right or left side of the deck.
3.
If the belt moves to the right, turn the right adjustment bolt clockwise ¼ turn and the left adjustment
bolt ¼ turn in the opposite direction to the clockwise.
