6
Remove the micro SD card from the display and insert into the SD
card holder supplied with the unit. Then insert SD card holder into
the PC, using your browser to view the SD card locate files called
DVID. By clicking on the selected file you will be able to view the
file.
The Edge Monitor can also be utilized as a mass storage device.
Simply connect the monitor to a PC with the USB cable. Do not
remove the SD card during this use.
Date/ Time Set Up:
In normal screen mode, press and hold the OK key for 4 seconds
to enter Date/Time setup. Use RT/LF arrow keys to increase or
decrease to desired number, and press OK to advance to the next
numeric value. Press the MODE key to exit the operation.
File Number Reset:
At power up, press and hold the MODE key to reset file number to
IMG0001. xxx. Note that any duplicate files with that number on
the SD Card will be automatically replaced with the new file.
Auto Record Setup:
To enable Auto Record feature hold down the PWR and OK
buttons together while turning on the display. The display will read
AUTO REC ENABLE.
To disable Auto Record feature press and hold down PWR and
OK buttons together while turning on the display. The display will
read AUTO REC DISABLE.
To power off the display in Auto Record mode first press the REC
button which will turn off the record mode, then power down the
display by holding the PWR button for a few seconds then release
and the display will show the message “Goodbye”.
Auto Shut Off:
The VLS 66xx Edge Series comes with an Auto Shut Off feature
preprogrammed into the unit. After 15 minutes of non-use the unit
will automatically shut down to save battery life. However if the
VLS blade or wand is still connected the unit will continue to
illuminate the lights and camera after the monitor shuts down.
