11
1) Monitor is non-functional, shows no sign of power
•
Check for proper charging of battery.
•
Hold down the On/Off button for 2 seconds before release
.
2) Monitor is powered, but shows blue screen
• Ensure that the monitor connector is properly aligned with
and fully inserted in the handle connection point
• Check connection of video blade to handle
• Ensure blade is properly fitted to the handle mount and the
connection is solid
• LEDs on video blade should be fully illuminated
• Verify battery is charged and installed correctly with positive
terminal inserted first/down in handle.
3) Image appears on screen, but is grainy or dim
•
Ensure that handle battery is adequately charged
•
Check all blade and handle connections
•
Ensure that lenses on camera and LEDs on blade are
clean, and not contaminated
4) Unit Turns on but then shuts down
If the display turns on, flashes a blue bar and then displays
“Shutting Down” it is likely that the battery has fallen below the
required voltage to run both the monitor and the VLS blade.
Even though the lights are illuminated on the blade or wand,
exchange the handle battery with a fully charged replacement.
