APD-100 Automatic Powder Dispenser User Instructions
21
4.4 Load Memory
4.4.2 Recall a Load From Memory
Recall a load by scrolling through the cartridge names
1.
Press the
RECALL
key…
C=_
is displayed.
2.
Press the
RECALL
key again…
The first cartridge memory is displayed.
3.
Press
FAST/^
or
TRICKEL/v
to scroll through the cartridge names. Press
ENTER
to select the displayed cartridge name.
4.
The information stored for this cartridge flashes on the display then…
The
MEM.xxx
number is displayed for this cartridge.
5.
Press the
ENTER
key when
MEM.xxx
is displayed to dispense this load.
6.
Press the
EXIT
key to exit from memory mode and return to the standard
weighing and dispensing mode.
Recall a load using the cartridge name
1.
Press the
RECALL
key to recall a load in memory using the cartridge name…
C=__
is displayed.
2.
Key in the name of the cartridge using the keypad and press the
ENTER
key
to accept…
The cartridge name is displayed briefly and the load information scrolls
on the display. If more than one cartridge is stored in memory with the
same cartridge name, the first one stored will be displayed.
3.
To dispense this load, press
ENTER
key again.
4.
You can scroll to a different memory location to dispense a different load. To do
this press the
FAST/^
key to choose the next location or press the
TRICKEL/
v
key to choose the previous location in the list of stored loads.
You can turn on the Auto Repeat function before selecting a load from memory or
after dispensing a load recalled from memory. See Auto Repeat Dispensing Mode
for more information.
WARNING: Be sure that the correct powder is in the reservoir
WARNING: Be sure that the correct powder is in the reservoir
