Installation Instructions
For Models:
Model Number / Description File Name
B-2112 Classic™ Series Surface-Mounted Soap Dispenser
B-2112.pdf
1
Page 1: ...Installation Instructions For Models Model Number Description File Name B 2112 Classic Series Surface Mounted Soap Dispenser B 2112 pdf 1 ...
Page 2: ...dispenser down into place see Figure 2 4 Tighten locking screw against washer Dispenser locks into place when point of locking screw is lodged under lug C of wall plate see Figure2 CAUTION Failure to tighten screw securely may cause dispenser to leak when filled above this point 5 Close and lock filler top by reversing operation in step 1 see Figure 3 MAINTENANCE 1 To fill dispenser open filler to...
Page 3: ...ut with wrench until tight enough so that valve will not leak around seal at front of unit 7 Install soap dispenser on wall bracket B ON UNITSWITH NOTCHED SOAPVALVE HOLE IN CONTAINER 1 Hold the collar nut with the 1 25mm closed end wrench Make sure the notch in the collar nut is facing toward the front of the dispenser and position nut behind soap valve hole inside dispenser 2 Screw new soap valve...
