Salora DVD324HBL, Instruction Manual

Page: 17 / 62

GB-16
8.2.5
Highlight the MPEG4 SUBTITLE option, and press the Arrow buttons to choose the
Subtitle you prefer. Press ENTER button to confirm.
Notes:If your preferred language isn’t available, the disc’s default language will be played.
8.3 AUDIO SETUP
The audio setup options are illustrated below:
8.3.1
Highlight the AUDIO OUT option, and press the Arrow buttons to choose the audio
output mode you prefer. Press ENTER button to confirm; There are 3 optional audio output
modes: SPDIF/OFF, SPDIF / RAW, and SPDIF/ PCM.
SPDIF/OFF : From the Coaxial Output, no signal is output.
If you select this option, the
HDMI has not audio output.
SPDIF/ RAW: Choose this setting if your DVD player is connected to a power amplifier with
a coaxial cable or an optical cable; When playing a disc recorded with Dolby Digital, DTS
and MPEG audio formats, the corresponding digital signals will be output from the Coaxial
Output jack or Optical Output jack. This player’s digital output jacks are designed for a
connection to a Dolby Digital, DTS , or MPEG receiver or decoder.
SPDIF / PCM: Choose this setting if your DVD player is connected to a 2-channel digital
stereo amplifier; When playing a disc recorded with Dolby Digital and MPEG audio formats,
audio signals will be modulated into a 2-channel PCM signal, and it will be output from the
Coaxial Output jack or Optical Output jack.
(The default set is SPDIF/PCM for the HDMI
audio output )
8.3.2 KEY
Use the Up and Down arrow button to move the scroll and adjust the key.
8.3.3 GM5
1) GM5 audio effect function could process 2CH audio source into 5CH sound. The
different modes are achieved by different DSP operating method, and the effects
will be different, too.
2) GM5 can support CDDA/MP3/VCD/AC3 2CH audio source.
a. There are extended items of GM5 function: SONG/CINEMA/OFF
b. GM5 will be unable when it is set to OFF.
c.
When it is set to SONG or CINEMA, the corresponding audio effect will be
achieved by GM5 function.
8.4 VIDEO SETUP
The video setup options are illustrated below:
8.4.1 BRIGHTNESS
Use the Up and Down arrow button to move the scroll and adjust the brightness.
8.4.2 CONTRAST
Use the Up and Down arrow button to move the scroll and adjust the contrast.
8.4.3 HUE
Use the Up and Down arrow button to move the scroll and adjust the hue.
8.4.4 SATURATION
Use the Up and Down arrow button to move the scroll and adjust the saturation.
8.4.5 SHARPNESS
Use the Up and Down arrow button to move the scroll and adjust the sharpness.