1 Connect the TV to the TV Aerial wall socket
)
.
(
)
Fig A
2 Connect the power cable to the wall socket
)
(
)
Fig B
3 Insert 2 x AAA batteries not supplied into
)
(
)
the Remote control Take care to observe
.
correct polarity
.
4 Switch on the television using the red power
)
(
)
button on the remote control or on the side of
,
your TV
.
5 You will now be welcomed with the First Time
.
Installation screen. “Use <> to choose OSD
language,
6 If you would like to to skip current tunning and
)
start another if you choose ATV DTV tuning
(
&
in the previous screen press MENU To cancel
),
.
completely press EXIT
,
.
signal being received is not strong enough The signal strength needs to be above 85
you can
. (
% -
see the signal strength the TV is receiving when you change channels programmes You will need to
/
)
increase the signal reception in order to receive all of the channels available The most economical
.
way to do this is by purchasing and connecting a signal booster’
‘
in between the TV and the TV aerial
socket If this does not solve the problem you will need to upgrade the TV aerial to a digital hi gain
.
,
-
compatible aerial
.
GETTING STARTED First Time Installation
-
06
