Salini SCG-4622B, User & Installation Manual

Page: 16 / 22

16
INSTALLATION COMPONENTS
Part Name Image Quantity
Installation clip 4
Screws ST4.2x24 4
Adhesive sealing tape 1
Natural gas regulator 1
Test point adapter 1
TROUBLESHOOTING
Any electrical or gas repairs to this appliance must conform to your local, state
and federal regulations. If in any doubt, please contact the service center.
• CAUTION: Always disconnect the unit from the power source when troubleshooting the unit.
• Repairs may only be carried out by service engineers or an authorised service agent.
• Any modifications or use of this appliance for any other purpose or in any other environment than
intended will void warranty.
When the appliance is not functioning as expected, some of the problems can be caused by simple
maintenance operations or something that has been forgotten and can easily be resolved without
having to call for technical assistance. Firstly check below recommendations:
•
Make sure the gas connection is open
• Check the electrical plug is plugged in
• Check that the knobs are set correctly for cooking and follow instruction method
• Check the electrical system safety switches. If there is failure in the system call an electrician.
If this has not resolved your problem, you can also review our troubleshooting table to see if there is
another remedy for the issue. If you still cannot solve the problem or notice any of the listed in the
‘Abnormal Operation’ list following, you should contact your local service centre to find a technician
who can service or repair the appliance.