Salini SCG-4622B, User & Installation Manual, Page: 15 / 22

15
CIRCUIT DIAGRAM 4 BURNER
CIRCUIT DIAGRAM 5 BURNER
•
To access the terminal board and the power cable, it is necessary to remove the hob from the
cabinet by unscrewing the relative fixing screw.
•
If the power cable needs changing, call an authorised service centre as it is necessary the use of
special tools. The technician will have to connect a cable with a suitable cross section, keeping the
earth wire longer than the phase wires.
•
To replace other gas and electrical components, that are lodged inside the hob, remove the work
top unscrewing the fixing screws of the burners.
•
Replace the seal each time you change a tap in order to guarantee a perfect tightness between
body and rail.
WARNING! Prior to any maintenance work or before changing parts, disconnect
the appliance from the gas and electricity power sources.
REPLACING COMPONENTS