Salini SCC-5925B, User'S Manual & Installation Instructions

Page: 9 / 18

9
INSTRUCTIONS FOR USE
WARNING! When the burners or plates are in use do not leave them unattended.
• Before use, operators must read and understand the manual safety cautions.
•
When the appliance is in use, ensure children are supervised at all times.
• When cooking, always check that pan handles are positioned out of reach for children.
•
Always inspect before use. If you see any cracks on the surface of the plate, do not use, disconnect
the appliance from the mains immediately and contact a service agent.
•
After you have used the appliance make sure that all the controls are off or closed.
The burners are graduated in their size and rating to designed to provide the exact heat required for
every style of cooking, appropriate sized cookware should be used according to cooking zone size.
There are indicator lights to show which burner or heating element is in operation. When you have
finished using each cooking zone, they should be turned off. Extra care should be observed at the end
of use to ensure that the zones are correctly switched off.
During cooking, ensure all other household equipment and materials do not touch the cooktop, as the
insulation material of this equipment is usually not resistant to high temperatures.
Warning lights indicating residual heat my not be visible to children. Even after the appliance has been
turned off, the cooking zone remains hot for a certain period of time. Make sure that children never
touch the appliance.
BEFORE FIRST USE
Before cooking for the first time, ensure all packaging is removed from the appliance. Then clean the
appliance surface and surrounds to ensure there is no debris remaining from the installation.
We recommend running an initial operation cycle to remove any surface chemicals and to evaporate
any humidity left from the manufacturing process. It is perfectly normal for a smell to be produced
during this process, ensure that the room is well ventilated.
First place a saucepan of water on each of the front hotplates and turn them on full for at least 30mins
before turning off the front zones. Then place the saucepans on the rear and center zones and turn on
for at least 30mins and then turn them off.
NOTE: If the controls do not work properly after the initial operation cycle, it may be that not all the
humidity has evaporated. In this case repeat the cycle until all of the humidity has been evaporated.
CAUTION! The packaging materials can be dangerous for children. Dispose of
packing materials properly to avoid choking hazards.
INSTRUCTIONS FOR USE
SWITCHING ON THE COOKTOP
The cooktop is equipped with touch-control buttons, to operate the buttons lightly press on the icons
printed on the glass surface. When a button is pressed an audible indicator will beep to confirm the
button has been pressed. Refer to the ‘COMPONENTS OVERVIEW’ section for button details.