Salini SCC-5925B, User'S Manual & Installation Instructions

Page: 10 / 18

10
INSTRUCTIONS FOR USE
When the appliance is not in use, all components and indicator lights will be switched off. To turn the
cooktop on, hold down power key for 2 seconds. An LED indicator will turn on above the symbol
to confirm that the appliance has been turned on. If no functions are selected within 10 seconds of
switching it on, as a precaution it will automatically turn off.
TURNING ON AND SETTING POWER TO THE SINGLE COOKING ZONES
After turning on the appliance, you must choose to ignite a cooking zone within the first 10 seconds, or
the cooktop will automatically turn off. Choose the cooking zone to turn on by selecting the corre-
sponding zone selection button refer to the ‘CONTROL PANEL’ descriptions in the ‘COMPONENTS
OVERVIEW’ section. Then ignite the cooking zone by setting the power. Each zone has a power setting
indicated between 0-9, when the increase or decrease button is pushed the power will
increase or decrease by 1.
To turn off a cooking zone, lower the power to 0 by selecting the zone then lowering power
by pressing until it shows 0. After 5 seconds the cooking zone will automatically switch off. The
cooking zones will still have residual heat and there will be a flashing indicator to warn that they
are still hot.
TURNING ON AND SETTING POWER TO THE DUEL COOKING ZONES
The duel cooking zones are marked with a double ring outline on the cooking zone. They are operat-
ed in the same method as the single cooking zones, except they have the option to use the single or
double burner within the duel zone, refer to the ‘COOKING ZONES’ information in the ‘COMPONENTS
OVERVIEW’ section to determine the power for each zone.
To activate the duel cooking zones with only one of the burners, you can select the zone in the same
way you would for a singe zone, by pressing the corresponding zone selection button once before
setting the power. One LED light indicator will show next to the zone selection button to indicate the
cooking zone is using a single burner . To set the duel cooking zone to use both burners, you must
press the zone selection button twice before setting the power. Two LED indicator lights will show next
to the zone selection button to indicate the cooking zone is using the double burner.
To turn off a cooking zone, lower the power to 0 by selecting the zone then lowering power
by pressing until it shows 0. After 5 seconds the cooking zone will automatically switch off. The
cooking zones will still have residual heat and there will be a flashing indicator to warn that they
are still hot.
TURNING OFF THE COOKING ZONES
To turn off a cooking zone, lower the power to 0. After 5 seconds the cooking zone will automatically
switch off. The cooking zones will still have residual heat and there will be a flashing indicator to
warn that they are still hot.