Salicru Equinox SLC EM Lite, User Manual

Page: 80 / 150

80
SALICRU
Depending on the browser you are using, you will see the
message that you are entering an unsecured URL, accept
everything and enter.
3.
Login screen.
Once you access the On-board Panel, the first screen you will
see is the following:
To log in, enter the appropriate credentials depending on the
user accessing the panel.
User Installer
Username guest engineer
Password SLCg13st SLC3ng1n
Permission
Network configuration
and NTP servers
Network configuration
and NTP servers.
Commissioning of the
installation.
Modify Zero Injection
Control parameters.
4.
Navigation menu.
The navigation menu (view as Engineer) is located on the left
side of the screen:
The content of each screen is detailed below:
•
Information: Screen showing the current configuration.
•
Network configuration: Screen for configuring the network
via WiFi or Ethernet.
•
Proxy: Screen for configuring a proxy server.
•
NTP: Screen for modifying the NTP servers.
The installer user incorporates a new screen for man-
aging the necessary Energy Manager parameters at
the time of installation.
8.3.2. Information.
The Information page shows a summary of the current configura-
tion of the unit.
The first time the device is connected, the information displayed
on the screen corresponds to the default configuration. If no data is
displayed, this means that no configuration has been set up so far.
100.0.0.1
172.26.1.1
255.255.255.0
172.26.0.250
172.26.0.251
If the information is not displayed correctly, exit the panel
using the logout option and log in again or clear the browser
cache and press CTRL + F5.
8.3.3. Network configuration.
Press Network Settings to enter the network settings. The net-
work can be configured via the Ethernet port or by using a WiFi
network.
Both with the WiFi network configuration and the IP
configuration via Ethernet cabling, a connectivity test can
be carried out to verify that the device has Internet access and has
been configured correctly.