Salicru Equinox SLC EM Lite, User Manual

Page: 70 / 150

70
SALICRU
2.
Connection of CT current transformers in the single-phase
device.
The voltage is read directly, while the current is measured via
the external current transformers.
The current transformer is already wired. They must be
installed on the cables of phase L1, just after the IGA, making
the arrow match the direction that the current follows in the
installation when energy is fed into the network: from the
loads to the connection.
IMPORTANT : respect the
order of phases L1, L2, L3
Pin CT pin Cable code
5 S1
L1 cable
6 S2
CONSUMPTION
GRID
P2
P1
Fig. 8. CT current transformer wiring diagram.
Power cables not supplied: 0.3 m mains cable (L1, N),
1.5 mm
2
cross section.