62
SALICRU
Connect to the network AP_0123456789 (Where 0123456789 is the device’s serial number)
Next, you have to enter the device's password to access the network. Enter the alphanumeric characters that appear in the "PWD"
field on the same label as the QR code.
Caution: this network does not have an internet connection, so a warning message may appear asking
the user to confirm they want to maintain the connection.
b.
Open the Internet browser. Enter the following address:
http://10.10.100.254/
Next, you have to enter the username and password to
access the configuration. Enter the following credentials:
User: admin
Password: admin
c
Start session.
c
d
. The setup assistant opens automatically. By defect, the
Status tab is displayed:
e
Select the “Wizard” option from the menu on the left.
A list of all the Wi-Fi networks (SSID) within range of the device will automatically appear. It may take a few seconds for the list to load.
f
Select the network you want to use to connect to the device. It may not necessarily be at the top of the list.
The list is sorted by signal strength (RSSI), so it could be that the network you are looking for appears further down, and you'll need
to scroll down to the bottom.
The following example screenshot shows the networks that have been detected, with the fourth in the list being the network provided
by the installation's router:
Summary of Contents for EQUINOX EQX2-4002-T
