Salicru EQUINOX EQX2-4002-T, Quick Manual

Page: 40 / 108

40
SALICRU
1. CONTENTS.
Ensure you have the following components according to the option chosen: zero feed-in, with or without 24H monitoring.
5
1
4
2
3
Item Description Quantity
1
ESM3T 90D24 EQX2 o ESM3T 300D50 EQX2 network analyser
1
2
Set of 3 pre-wired and calibrated current transformers (accessory to
1
)
1
3 485/WIFI 24H EQX2-T communication module (option for 24H communications)
1
4
Long-range antenna (accessory to
3
)
1
5
Short-range antenna (accessory to
3
)
1
In addition, you will need the following material that is
not supplied
to install the devices:
Description Length
Cable 1 : RS485 Ethernet twisted-pair communications cable or
equivalent, 0.25 mm
2
cross-section with RJ45 connector. One end with
the two cables to connect to the RS485+ and RS485- ports of the 485/
WIFI 24H EQX2-T, and the other with an RJ45 connector to connect
to the RJ45 port of the ESM3T 90D24 EQX2 / ESM3T 300D50 EQX2
network analyser.
Length equivalent to the distance between the ESM3T
90D24 EQX2 network analyser and the 485/WIFI 24H EQX2-T
communication module.
Cable 2 : RS485 twisted-pair shielded communications cable, 0.25 mm
2
cross-section
Length equivalent to the distance between the EQUINOX2
solar inverter and the ESM3T 90D24 EQX2 network analyser.
Cable 3 : RS485 twisted-pair shielded communications cable, 0.25 mm
2
cross-section.
Length equivalent to the distance between the EQUINOX2
solar inverter and the 485/WIFI 24H EQX2-T communication
module.
Network cable (L-N) with a 1.5 mm
2
cross-section to supply the 485/
WIFI 24H EQX2-T communication module.
0.3 m - or length equivalent to the distance between the
mains supply and the 485/WIFI 24H EQX2-T communication
module.
Network cable (L1, L2, L3, N) with a 1.5 mm
2
cross-section to supply the
ESM3T 90D24 EQX2 / ESM3T 300D50 EQX2 network analyser.
0.3 m - or the length equivalent to the distance between the
protection components on the switchboard between which
the devices are inserted.