47
QUICK GUIDE
EQUINOX
- PHOTOVOLTAIC INVERTERS -
ES
Connect the 485/WIFI 24H EQX2-T communication module to the ESM3T 90D24 EQX2 / ESM3T 300D50 EQX2 network analyser and the
EQUINOX2 solar inverter:
1.
Connect the cables listed in the previous section as follows:
Connect the end of
Cable 1
with the RJ45 connector to the
RS485-2
port on the ESM3T 90D24 EQX2 / ESM3T 300D50 EQX2 network
analyser, and the two wires at the other end (coming from pins 7 and 8 of the RJ45 connector), to pins 5 and 7 of the 485/WIFI 24H
EQX2-T communication module, along with the wires of
Cable 3
.
Connect one end of
Cable 2
to pins A and B of the
RS485-1
port on the ESM3T 90D24 EQX2 / ESM3T 300D50 EQX2 network analyser,
and on the other end, which goes to the inverter, screw on the appropriate connector as shown in
One end of
Cable 3
is already connected to pins 5 and 7 of the 485/WIFI 24H EQX2-T communication module together with
Cable 1
.
On the other end, which goes to the inverter, screw on the appropriate connector as shown in
Caution: Respect the polarity
of the communication cables
485+ and 485-.
L1
Cable 1
Cable 1
Cable 2
to the
communications
port of the
EQX2-T Inverter
analyser
to the RS485
communications
port of the
EQX2-T Inverter
Cable 3
Cable 3
L2
L3
N
We recommend you use
ferrules to join the
terminals of both communication
cables.
Caution:
Fragile
connector,
maximum torque
0.1 Nm
.
Summary of Contents for EQUINOX EQX2-4002-T
