28
•
Cleaning and maintenance by the user must not be carried out by children
unless they are at least 8 years old and supervised. Children under 8 years of
age must stay away from the product.
•
Do not use this appliance with a programmer, timer, remote control system, or
any other component that would automatically switch the appliance on.
•
Always clean product surfaces that come into contact with food or foodstuffs
according to the instructions in this user manual.
•
Before connecting the product to an electrical outlet, make sure that the
voltage on the product's rating plate matches the voltage in your electrical
outlet.
•
Fully unwind the power cord before using the product.
•
Do not connect the appliance to the mains socket unless it is properly
assembled.
•
Do not wrap the power cord around the product.
•
Do not connect or disconnect the product's power cord from the electrical
outlet
with wet hands.
•
Make sure that the fork of the power cord does not come into contact with
moisture, water or other liquids. If this still happens, dry the fork carefully
before using it again.
•
Do not disconnect the appliance from the power outlet by pulling the power
cord. Damage to the power cord or electrical outlet could occur. Disconnect
the power cord from the power outlet by pulling the plug.
•
Do not place heavy objects on the power cord. Make sure that the power cord
does not hang over the edge of the table or touch hot surfaces or sharp
objects.
•
Always clean the power cord with a dry cloth only, never wash it with water.
•
Always switch off and unplug the appliance when not in use, when left
unattended and before cleaning, maintenance or storage.
•
Keep the supply cable dry.
•
Only connect the appliance to a properly earthed socket.
•
Do not plug the appliance into an extension cord.
•
If the supply cable is damaged, have it replaced by a qualified service centre to
avoid a dangerous situation. It is forbidden to use the appliance with a
damaged supply cable.
WARNING:
This appliance is not intended to be controlled by a
programmer, external timer, remote socket or remote control.
•
During operation, a clear space of at least 15 cm must be left on all sides of the
product to ensure sufficient air circulation.