3
. Pull the choke control out fully.
4
. Hold the body of the product on the ground
with your left hand.
5
. Put your right foot through the rear handle.
6
. Pull the starter rope handle slowly with your
right hand until you feel some resistance.
7
. Pull the starter rope handle with force.
CAUTION:
Note:
Do not pull the throttle trigger when
you start the engine.
8. Continue to pull the starter rope handle
until the engine starts or tries to start (pull
max
6
times).
9. If the engine starts or tries to start, push the
choke control
back fully
position.
10.Continue to pull until the engine starts.
17
11.Hold the rear handle with your right hand
and the front handle with your left hand.
12.Immediately pull the front hand guard
rearward in the direction of the front handle
to disengage the chain brake.
Don’t pull the rope to its limit .
As this may cause
the
rope
to
break
.
Don’t let the rope snap back.
Hold the handle and let the rope rewind slowly
There is no need to pull the rope briskly
There is no harsh resistance when pulling
Note:
The chain will move.
13.Run 20-30 seconds at elevated idle speed.
14.Pull the throttle trigger slowly but fully for
8-10 seconds, then release.
Make sure decompression valve in all the time.
Choke control
Choke control
