or death because of asphyxiation or carbon
monoxide.
•
Tighten the fuel tank cap carefully or a fire
can occur.
•
Move the product at a minimum of 3 m (10
ft) from the position where you filled the
tank before a start.
•
Do not put too much fuel in the fuel tank.
•
Make sure that a leak cannot occur when
you move the product or fuel container.
•
Do not put the product or a fuel container
where there is an open flame, spark or pilot
light. Make sure that the storage area does
not contain an open flame.
•
Only use approved containers when you
move the fuel or put the fuel into storage.
•
Empty the fuel tank before long-term
storage. Obey the local law on where to
dispose fuel.
•
Clean the product before long-term
storage.
•
Remove the spark plug cable before you
put the product into storage to make sure
that the engine does not start accidentally.
Safety instructions for maintenance
•
Disconnect the spark plug before doing
maintenance on the product, not including
carburetor adjustments. .
•
Make sure the saw chain stops moving
when the throttle trigger is released.
•
Keep the handles dry, clean, and free from
oil or fuel mixture.
•
Keep caps and fasteners correctly
tightened.
•
Replacement components that are not
approved or the removal of safety devices
can cause damage to the product. This can
also cause possible injury to the operator
or bystanders. Only use accessories and
replacement parts as recommended. Do
not change your product.
•
Keep the saw chain sharp and clean for
safe and high performance.
•
Obey the instructions for lubricating and
changing accessories.
•
Examine the product for damaged parts.
Before more use of the product, make sure
the damaged guard or part operates
correctly. Examine for broken or incorrectly
aligned parts, and parts that do not move
freely. Examine for other conditions that
can have an effect on the operation of the
product. Make sure the product is correctly
installed. A guard or other damaged part
must be repaired or replaced by an
approved dealer unless written in the
operator’s manual.
•
When not in operation, keep the product in
a dry, high or locked area away from
children.
•
During transportation or storage of the
product, use a transportation guard or case
to move the product.
•
Do not use waste oil. Waste oil can be
dangerous to you and can cause damage
to the product and environment.
11
