5
Smarty 3X VE / Smarty 3X VE 3.0
www.salda.lt
- Do not use the unit for purposes other than its’ intended.
- Do not disassemble or modify the unit in any way which may lead to mechanical failure or injury.
- Use special clothing and be careful while performing maintenance and repair jobs – the unit’s and its components’ edges may be sharp and cutting.
- Do not wear loose clothing that could be entangled in to operating unit.
- Do not place fingers or other foreign objects through inlet or exhaust guards or into connected duct. If a foreign object enters the unit, immediately disconnect
power source. Before removing object, make sure that any mechanical motion has stopped, the heater has cooled down and the restart is not possible.
- Do not connect to any other power source than indicated on the model label.
- Do not place or operate unit on unsteady surfaces and mounting frames.
- Mount the unit firmly to ensure safe operating.
- Never use this unit in any explosive or aggressive elements containing environment.
- Do not use the unit if external connections are broken or damaged. If there are any defects, stop operating the unit and replace the damaged parts
immediately. That can be performed only by qualified electrician.
- Do not use water or another liquid to clean electrical parts or connections.
- If you notice water on electrical parts or connections, stop operating the unit.
• Unit is designed to operate only indoors.
• It is forbidden to use the unit in potentially explosive environment.
• Unit is designed to supply/extract only clean air (free of chemical compounds causing metal corrosion, of substances aggressive to zinc, plastic and
rubber, and of particles of solid, adhesive and fi bred materials).
Supply
- temperature min./max.
*
[°C]
-15 / +40
- humidity
[%]
90
Extract
- temperature min./max.
[°C]
+15 / +40
- max. humidity
[%]
70
*
With additional pre-heater
11
12
1
2
3
4
5
6
7
10
1. Control Box cover
2. Exhaust air temperature sensor (TE)
3. Extract air humidity and temperature
sensor (DTJ100.1)
4. Fresh air temperature sensor (TJ)
5. Exhaust air fan (IV)
6. Supply air fan (PV)
7. Heat exchanger (PR)
8. Extract air filter (IF)
9. Supply air filter (PF)
10. By-pass damper actuator (M1)
11. Supply air temperature sensor (TJ)
12. Power supply cable
9
8
