19
General
Specifications
Applications
All Salamander pumps are designed to boost
low pressure hot and cold supplies from tank-
fed services.
Voltage
220-240 volts 50 Hz.
Motor type
Capacitor start and run induction type motor
with stainless steel shaft and in-built resetting
thermal protection (complies with BS5000
part 11).
Pump materials
All moulded components are manufactured
from Acetal Copolymer.
Maximum head
RP 50 TU and RP 55 SU
5 metres
All other pumps
10 metres
Pumps fitted with RCM3 maximum 3 metres
static head.
Pump noise
With the technological advances achieved in
the Right pump range, Salamander has taken
another step forward in the quest to supply all
our customers with even quieter centrifugal
pumps. Despite this no pump is completely
silent.
Correct installation will minimise vibration and
transmission noise.
WRAS Approval
Salamander Pumps’ Right Pump range is fully
WRAS approved.
Mechanical seals
Scale deposits in water supplies can cause the
mechanical seal to stick if left for long periods
without use. We recommend the Right pump
positive is ran at least five minutes every four
weeks to ‘exercise’ all working parts.
Connections
3⁄4” BSP male.
Initiation
Fully automatic, flow switch operated,
requiring 1 litre in 30 sec per side or
2 litre in 30 sec mixed, except the Right pump
universal range when required to operate in
negative head mode.
Temperature
Maximum fluid temperature 65ºC.
Minimum fluid temperature 5ºC.
Standards and approvals
Splash proof rating IPX3.
Complies with the requirements of
current UK Regulations (UKCA) and
European Comunity Directives (CE) safety
standards for household and similar
electrical appliances.
The company operates a policy of continuous
development and reserves the right to change
any of the specifications of its products
without prior notice. All information data and
illustrations given in this leaflet may be subject
to variation.
Summary of Contents for Right Pump Series
Page 27: ...27...