2.4
Revised 3/04/11
INSTALLATION & SETUP
Unpacking the Unload Station
The unload station is an optional accessory provided
for the collection of printed slides. It is packaged in a
wooden crate (Figure 2-I) that should be thoroughly
inspected for signs of visible damage before unpacking. If
there are no signs of damage:
Figure 2-I
1. Remove the two screws from each side of the
wooden crate (Figure 2-J).
Figure 2-J
2. Remove the lid by lifting it up and away from the
crate.
3. Remove all packing material and the small box
containing unload trays.
4. Lift the unload station out of crate and place on a
sturdy, level counter.
Unpacking the Accessories
When opening the printer box, confirm that all
accessories have been included with the instrument:
Operating manual (1)
Warranty card (1) (inside the Operating Manual)(only
in U.S.A.)
Ink cartridge (1)
Transport cartridge (1)
– installed in the instrument
Curing lamp (1)
Power cord (3)
Serial printer cable (1)
Slide magazines (6)
Slide bin assembly (1)
Screwdriver (1)
Allen key size 2.5 (1)
Brush (1)
Replacement fuses
3.15 A (2)
CD containing the printer driver (1)
Location plate (1)
Infrared absorbing glass (2)
Cleaning Rod (25)
