SAKURA SE-3150B
7
using life, press the [On / Off] button first, then pull out the power cord.
(7)
In order to make operating time longer, the fan would still work for cooling the plate,
is better to plug it out after the fan stops working.
(8)
Please pull out the power cord and put it away when not used for a long time.
(9)
Some models have structural designs against cockroaches, if needed, can put
something like mothball to expel the cockroaches.
(10)
When finish cooking, the plate still has high temperature, please do not touch the
plate by your hand.
TROUBLESHOOTING AND TREATMENT
During operations, if any error occurred, please check the following table before calling
for service. Below are common errors and the checks to perform.
If the above remedies / controls cannot fix the problem, unplug the appliance
immediately, contact the service center for inspection and repair, note the error code,
and report it to service center ltd.
To avoid any danger and damage to the appliance, do not disassemble or repair it by
yourself.
MEKONG TRADING CORPORATION
Customer Service: 1900 636 881
Website:
PHENOMENON
CHECK
Insert the power cord; press [On /
Off] button, the power indicator
not bright
If the plug and socket inserts tight and power socket is
in good condition
On / Off indicator not bright
Display or main board is in good condition
When using stops heating
suddenly
If the surrounding temperature is high; If the timer time
is reach; System protection function start, please use
after 10 minutes
When the power cord damage, please consult specialized after-sale replacement of the
same model’s power cord
Error Codes occur E1
The voltage low than 100V
Error Codes occur E2
The voltage is over 280V
Error Codes occur E3
The plate sensor is open or short circuit
Error Codes occur E4
The surface temperature is too high
Error Codes occur E5
Inlet and outlet is blocked or the cooling fan is broken
