7
Turning On the Camcorder Using the Camcorder
When powering the camcorder ON for the first time, the camcorder will take you through the initial setup.
Powering the Camcorder ON
1)
Batteries
Make sure the batteries have been inserted properly, according to the polarity shown inside the battery compartment.
Use 3 x AAA (1.5V) batteries. Alkaline batteries are recommended. Batteries not included.
Note:
Remove the batteries from the camcorder when not in use for an extended period.
Do not mix alkaline and non-alkaline batteries.
The energy status of the power is displayed on LCD as shown below:
Full battery power
Medium battery power
Low battery power
2)
SD Memory Card
Make sure an SDHC memory card has been properly inserted into your camcorder. SDHC card not included.
Selecting
the modes
Accessing
the menu
Summary of Contents for 38056v2
Page 4: ...4 Parts of the Camcorder ...
