Sakai SW880-1, Operator'S Manual

Page: 65 / 111

2. OPERATION
– 60 – – 61 –
1) Impact frequency lamp
The position where the impact frequency lamp flashes, indicates whether actual impact
frequency is greater or fewer than the preset IPF.
Yellow light : +3 < Difference comparing to IPF numbers
Left green light : +1 < Difference comparing to IPF numbers
≦
+3
Center green light : -1
≦
Difference comparing to IPF numbers
≦
+1
Right green light : -3
≦
Difference comparing to IPF numbers < -1
Red light : Difference comparing to IPF numbers < -3
2) Rolling speed / Error codes / Temperature display
When the ignition key is turned to the ON position, PON shows up for approximate 2
seconds.
After that, the rolling speed is displayed. If there is an error in the system, the error code is
displayed.
Temperature is displayed when the Temperature / Machines speed selector switch is
selected to F position. ( NOTE: Temperature display function is OPTIONAL)