Sakai SW880-1, Operator'S Manual

Page: 52 / 111

2. OPERATION
– 48 –
2.3.4 Traveling
CAUTION
While travelling, do not turn the starter switch " " .
WARNING
• When starting, operate the horn after securing the safety around the machine.
• Be sure to wear the seatbelt during operation.
1) Select mode according to propel condition.
position : Work condition
• The AUTO SPEED function can be
controlled with this mode. (See page 52)
• Maximum speed is regulated by each
vibration frequency.
At FULL position of Engine speed selector switch.
position : Traveling condition 0
–
6.8 mile / h. (0
–
11 km / h)
NOTE: Selection is applied only when the F-N-R lever is in the neutral position.
IMPORTANT
Be sure to shift gears while the machine is stopped. Can not shift gear during
running.
WARNING
On a steep slope, run the machine at low speed.
2) Select MID or FULL position of Engine speed selector
switch.
NOTE: Machine speed can be operated under at
FULL position of Engine speed selector switch.
Maximum speed is reference value.
Frequency
(vpm)
Propel speed
mile / h (km / h)
2500 0 – 2.8 (0 – 4.5
）
3000 0 – 3.4 (0 – 5.5
）
4000 0 – 4.5 (0 – 7.2
）