3. PERIODIC MAINTENANCE
– 76 –
– 77 –
㉒
Center pin and tilt pin bearings
Apply grease at 6 locations.
CAUTION
Be sure to use grease recommended by SAKAI
(refer to page 90).
Steering cylinders
Apply grease at 4 locations.
The steering cylinder is provided on both sides of the
machine.
CAUTION
Be sure to use grease recommended by SAKAI
(refer to page 90).
Transmission, Differential case and final drive
Check for oil level, and add
oil through the fill port as
necessary.
CAUTION
Be sure to use grease
recommended by
SAKAI
(refer to page 90).
3. PERIODIC MAINTENANCE
– 76 –
⑩
Rubber dampers
Check the rubber blocks for cracks, and their mounting
bolts for looseness.
⑪
Gear case : Wheel moter
1) Position the drum so that the drain plug comes to the
bottom. Keep the three sailent parts (indicated in black
in the figure) on the axle shaft to face upward.
2) Remove the fill / level plugs.
3) Check the oil level and fill the oil through the fill port
until it overflows at the level port as necessary.
4) Refit the fill / level plugs.
CAUTION
Be sure to use gear oil recommended by SAKAI
(refer to page 90).
⑳
Vibrator
Check for the oil level and leakage.
CAUTION
Be sure to use gear oil recommended by SAKAI
(refer to page 90).
