2. OPERATION
– 42 –
– 43 –
2.3.2 Starting the engine
WARNING
Check that the F-N-R lever is in the neutral position, and press down the parking
brake switch and sound the horn when starting the engine after making certain
that there are no one and no objects close to the machine.
1) Set the engine speed select switch in the IDLE position.
（±
50 min
-1
）
Engine
speed
IDLE
ECO
FULL
900 min
-1
1850 min
-1
2200 min
-1
2) Turn the starter switch to the "
" position and check
that the warning lamps and parking brake indicator
lamp on the monitor display are on.
3) Start the engine after the engine check lamp lights up
and goes out.
2. OPERATION
– 42 –
2.3 Operation
WARNING
• This machine is a one-man roller.
• Operate the machine from the operator’s seat.
• Be sure to wear the seatbelt during operation.
2.3.1 Before-starting inspection
1) Check that the steering lock pin is in the carrying position.
WARNING
Make sure that the steering lock pin is in the
carrying position before putting the machine in
motion. Steering is impossible if the pin is in
the steering lock position.
The pin is located at the right of the center of the
machine.
To unlock the pin.
①
Pull out the lock pin.
②
Set the pin in the carrying position.
2) Check that the F-N-R lever and is in the neutral position
Ⓝ
.
3) Confirm that the parking brake is engaged.
NOTE: When the F-N-R lever is not in the neutral
(middle) position, or the parking brake has been
released, the interlocking system goes into
operation and the engine will not turn on. Be sure
to confirm that the F-N-R lever is in the neutral
(middle) position, and that the parking brake is
engaged before starting the engine.
