2. OPERATION
– 32 –
Parking brake switch
If switch
is pressed down, the parking brake will be
applied with the indicator lamp
P
on the dashboard lit up.
When pressed again, the brake is released and the
indicator lamp goes off.
NOTE: When pressing the parking brake switch during machine running, the brake is
activated and the engine is stopped at the same time. When starting the engine
again, shift the F-N-R lever back to the neutral position, set engine speed to idle,
activate the parking brake switch, and then start the engine.
WARNING
• To disengage the brake, be sure to press the button again instead of pulling it.
• Always press the button to apply the parking brake before dismounting from the
machine.
CAUTION
Never pull the switch up.
Horn switch button
Pressing the button at the center of the
steering wheel sounds the horn.
