Sunfree Series
- 33 -
Operating and interface description
：
With user selected the edit box of Date, edit the system date by pressing ENT, and
switch to the setting of M/D/Y, set the target value by pressing or ,
drop out of
edit status by pressing ESC.
Same operation as edit system time.
Note: With the cursor selected the edit box, appear dialog box to request setting
system time while press ESC. This dialog box prompt user not across the debugging
at first time running. LCD will display as below:
Figure 6.2.1-2 System time setting (Prompt by ESC)
6.2.2 Battery data setting
While inverter using at first time, after set system time, then set the battery data,
LCD will display as below:
Figure 6.2.2-1 Battery setting
