Sunfree Series
- 32 -
The inverter provides two buttons for inquiry of operational information and
parameters, these two buttons can be used repeatedly.
Name of the button
Operation
Description
ESC
Press time shorter
than 2 second
Return to parent menu or cancel the demand
Press time longer
than 2 second
Cut off output to load
ENT
Press time shorter
than 2 second
Move the cursor to the right or enter submenu or
edit status
Press time longer
than 2 second
Turn on output load
Table 6.2 Instructions for buttons
6.2 First Run Setup
6.2.1 System time setting
When the inverter begins to run for the first time, please configure the time of
system, and the inverter LCD will display as below:
Figure 6.2.1-1 System time setting
When the cursor selected the edit box, press ENT to edit status, set the target value
by pressing or . If Press time longer than 2 seconds, the value will
decrease or
increase quickly. With the edit status, switching different value setting by pressing
ENT. Drop out of edit status by pressing ESC.
With the edit status, switch different
edit box or button by pressing
or .
