Sunfree Series
- 18 -
4.4 Mounting Procedure
4.4.1 Mark the Positions of the Drill Holes of the Rear Panel
The mounting position should be marked as shown in Figure 4.3.
Figure 4.3 Dimensions of rear panel of Sunfree inverter
4.4.2 Drill Holes and Place the Expansion Tubes
According to the guides, drill 4 holes in the wall (in conformity with position marked
in Figure 4.4, and then place expansion tubes in the holes using a rubber mallet.
260
100
Ø8
Figure 4.4 Drill holes dimensions of Sunfree inverter
