INSTALLATION FOR USERS OF WINDOWS® XP
Quick Install (Drivers Only)
This installation will
ONLY
install the drivers for your Saitek controller. The
Full Install
(below) will
install the drivers and the Saitek Smart Technology programming software for your Saitek
controller.
1
With your computer switched on, close down any programs that are currently running and
insert the Saitek Smart Technology CD into your CD-ROM drive.
2
When the Introduction Screen appears, click
Install Software
to continue.
3
When the
Welcome
screen appears, click
Next
to continue. (If the CD does not run
automatically, select
Start
from the Windows® Taskbar, then
Run
and type
D:\Setup.exe
and
click
OK
- where
D:\
is letter of your CD-ROM drive).
4
After reading the Disclaimer, select the
I accept the terms of the Disclaimer
option and
click
Next
to continue.
5
At the
Device Driver Installation
screen, click on
Next
and follow the on-screen instructions.
6
When prompted, plug your controller’s USB connector into your computer, then click on
Configure
and then
Continue Anyway
. Follow the on-screen instructions until you reach
the
Controller Properties
screen.
7
When the
Controller Properties
screen appears, click
Next
to view the
Test
screen.
8
Now try out all your controller’s buttons and controls to show that it is working properly. When
you have finished, click
OK
.
9
At the
Programming Software
screen, select
Typical User
and click
Next
.
10 At the
Registration
screen, select
Register my Saitek controller online
and follow the on-
screen instructions or select
Register Later
and click
Next
.
11 Click on
Finish
to complete the installation. Your Saitek controller is now ready for use with
your favorite games.
Full Install (Drivers and Programming Software)
This installation will install the drivers and the Saitek Smart Technology programming software for
the Saitek controller.
1
Follow points 1 – 7 of the install procedure in
Quick Install (Drivers Only)
, then at the
Programming Software
screen, select
Advanced User
and click
Next
.
2
At the
Programmable Controller Drivers
screen, click
Update
and follow the on-screen
instructions. At this point you will be asked to install such features as the Saitek Magic Mouse
and Saitek Magic Keyboard (these are what XP calls the various elements of your Saitek
controller). Continue to click on
Next, Continue Anyway
and
Finish
to accept the installation
until the Installation of programming software successful screen appears.
3
At
the Installation of programming software
successful screen, click
Next
.
4
At the
Registration
screen, select
Register
and follow the on-screen instructions or select
Register Later
and click
Next
.
5
Upon completion of the installation, you have the option to
Run Profile Editor
, which will give
you a view of the 3D programming environment. If you do not wish to see the Profile Editor at
this point, just uncheck the box and click on
Finish
to complete the installation. Your Saitek
controller is now ready for use with your favorite games.
For a complete guide on how to program your Saitek controller, visit the Saitek website at
www.saitek.com
.
R440 Manual all lang.qxd 20/04/2004 16:40 Page 4
