Saint Song Corporation TX-3, User Manual, Page: 16 / 33

30 31
installed operating system.
1. Place the Driver CD into the CD-ROM driver.
2. Click START-SETTINGS-CONTROL PANEL-Network.
3. When “ Network Setup Wizard ” appears select the “ Wired to network ” folder tab and
click Next .
4. When Network Adapt list box appear click Select from list .
5. When “ Select Network Adapter ” appear, click Have Disk .
6. When “ Insert Disk ” appears, enter C:\LANDrv and click OK .
7. When “ Select OEM Option ” appears, (Highlight the “Intel(R) PRO Adapter” listing)
click OK .
8. Click Next to continue.
9. When “ Network Protocols ” appears, follow the instructions to install the drivers and
click Next .
10. When “ Network Services ” appears, follow the instructions to install the drivers and
click Next .
11. Click Next to selected components.
12. Insert the CD-ROM for workstation disk and enter E:\, click Continue .
13. Enter your IP address, Subnet Mask, and default Gateway settings.
14. Click Finish to restart your computer.
Modem Driver Installation
If you want to install the modem driver separately, you can follow the steps below:
If your CD-ROM Drive letter is E: and you are installing under Windows 98 Second Edition ,
you should run the following command:
E:\815\Win98\ModemDrv\Setup.exe
If you are installing under Windows Millennium Edition (ME):
E:\815\WinMe\ModemDrv\Setup.exe
8. Windows will detect the “ Intel
®
PRO/100 VE Network Connection” .
9. Click Next and follow succeeding prompt instructions to finish driver installation .
Click Finish .
Windows 2000:
1. Place the Driver CD into the CD-ROM driver
2. Click START-SETTINGS-CONTROL PANEL-SYSTEM
3. When the System Properties appear, click Hardware the folder tab.
4. Click on Device Manager .
5. Double-click the “ Ethernet Controller ” device under the Other Device.
6. Click on the Reinstall Driver button.
7. When the “ Upgrade Device Driver Wizard ” appear, click on Next .
8. Click on “ Search for a suitable driver for my device (recommended) ” and click
Next .
9. Click on “Specify a location ” and Browse to the LAN driver subdirectory of the OS
or enter E:\815\Win2k\LANDrv click OK .
10. Windows will detect the “ e:\815\Win2k\landrv\net82577.inf” ; click Next and
following succeeding prompt instructions to finish driver installation. Click
Finish .
Windows NT:
If you want to install the LAN driver separately, you can follow the steps below based on
your installed operating system.
NOTE: Prior to installing, make sure you have upgrade to Service Pack 4 or later. See the
System Requirements section. If you are also installing NT 4.0 at this time, you must first
create a floppy disk for the driver installation. You can from the CD-ROM drive path:
815\WinNT\LANDrv copy files to floppy disk.
When “Windows NT Setup” appears the prompt and you select the “Do not connect this
computer to a network at this tome” check box. You can follow the steps below based on your