SAINT-GOBAIN Norton Clipper CS 451 D7, Operating Instructions Manual

Page: 22 / 32

VERS.2015.07.21 CS 451 D7_MAN_EN
22
Cleaning the oil filter
The oil filter should be cleaned at the same time as the engine oil is changed, since oil escapes
when the filter is removed.
Loosen the screw « 1 » with approx. 5
rotations.
Remove the oil filter from housing.
Use an air line to blow out oil filter dirt from
the inside outwards.
Check the joint washer « 1 » whether it is
damaged. Replace it if necessary. Check the
joint washer « 2 » whether it is damaged and
correctly fitted. Replace the oil filter if
necessary.
Lubricate joint washer before fitting.