VERS.2015.07.21 CS 451 D7_MAN_EN
11
The precisely manufactured blade shaft is fitted into two heavy-duty self-aligning pillow block
bearings, including grease nipples. On one end, a Poly-V pulley with taper lock fixing is assembled.
On the other end, the shaft is reduced to 25,4mm, allowing an inner flange to be fixed. Outer flange
is assembled on the shaft with a 36mm locking nut.
(A 20 mm thick spacer and an outer flange, with dowel pinholes, can be provided as accessories)
The steel belt guard (5) is a sealed two piece unit. The backing plate is bolted to the mainframe of
the machine and locking nuts are welded to it. The outer guard, covering the Poly-V belt and taper
lock pulleys, is held in place by four locking bolts.
The HATZ 1B30 diesel engine (6) is started using a recoil starter. The following picture is showing
the different parts of your engine that you need to know in order to use and maintain your machine
correctly:
1.
Type plate
2.
Cylinder head cover
3.
Exhaust silencer
4.
Exhaust mesh insert
5.
Oil pressure switch
6.
Starter motor
7.
Voltage regulator
8.
Crankshaft
– power take-
off
9.
Oil drain plug
10.
Speed adjustment lever
11.
Oil filter
12.
Engine mountings
13.
Ignition key
14.
LED display
15.
Intake opening for cooling
and combustion air
16.
Oil filler cap and dipstick
17.
Recoil starter
18.
Engine shutdown pin
19.
Dry-type air cleaner
20.
Lifting lug
21.
Fuel tank cap
22.
Noise insulating hood
The water cooling system (8) is composed of a 25-litre water tank, a water tank cock and two water
nozzles located on the blade guard ensuring adequate flow of water to both sides of the cutting
blade. This system can also be connected directly to tap water.
The pointers (9) allow the operator to make precise cut easily. It is composed of a front cutting
guide, a sight welded on the blade guard and rear guide assembled on the back of the blade guard.
The combination of these 3 devices allows easy and accurate alignment of the blade with cutting
line.
A hook (10) allows the CS 451 to be lifted easily, safely, and in a balanced way.
Parking brake (11) secures the machine when it is not running.
Summary of Contents for Norton Clipper CS 451 D7
