- 32 -
The following is a list of the individual alarm parameters that
are set (in order):
Note:
To prevent repetitive temperature alarming, there is a
0.9 °F(0.5
°C
) tolerance band. For example, if you set the high
alarm to 80.0°F(26.7
°C
) and silence the alarm, the alarm icon
will continue to flash until the temperature falls below 80.0°F
(26.7
°C
), at which point, the alarm will reset and must increase
above 80.0°F(26.7
°C
) to activate again.
Note:
To prevent repetitive alarming of humidity, there is a
4% tolerance band in humidity alarm. For example, if you set
the high alarm to 60% and silence the alarm, the alarm icon
will continue to flash until the humidity falls below 56%, at
which point, the alarm will reset and must increase above 60%
to activate again.
1.Alarm hour(alarm 1)
2.Alarm minute(alarm 1)
3.Alarm hour(alarm 2)
4.Alarm minute(alarm 2)
5.Wind Gust HI alarm
6.Wind average HI alarm
7.Outdoor temp HI alarm
8.Outdoor temp low alarm
9.Outdoor humidity HI alarm
10.Outdoor humidity low alarm
11.Outdoor feels like HI alarm
12.Outdoor feels like low alarm
13.Outdoor dew point HI alarm
14.Outdoor dew point low alarm
15.Rainfall (1h) HI alarm
16.Rainfall (24h) HI alarm
17.Absolute pressure HI alarm
18.Absolute pressure low alarm
19.
Relative pressure HI alarm
20.Relative pressure low alarm
21..Indoor temperature HI alarm
22.Indoor temperature low alarm
23..Indoor humidity HI alarm
24.Indoor humidity low alarm
Summary of Contents for WS0835
Page 51: ...51...