- 14 -
Note:
While in the search mode, the remote search icon
will be constantly displayed until all the measured values
received. The console will automatically switch to the normal
mode from which all further settings can be performed.
When connected with the Integrated Outdoor Sensor, the
measured value (Indoor temperature,humidity,pressure,moon
phase,time,wind speed,wind gust,wind direction,rain,outdoor
temperature and humidity) will show up on the display console.
Note:
Make sure that the distance between weather station
sensors and display console should be within 10ft (3m) to 100ft
(30m). If the weather station sensors is too close or too far
away, it may not receive a proper signal.
3.5 Sensor Operation Verification
The following steps verify proper operation of the sensors prior
to install the sensor array.
1.
Verify proper operation of the rain gauge.
Tip the
Integrated outdoor sensor back and forth several times. You
will heard a “ticking” sound within the rain gauge. Verify the
rain reading on the display console is not reading 0.00. Each
“ticking” represents 0.1 inch of rainfall.
2.
Verify proper operating of the wind speed.
Rotate the
wind cups manually or with a constant speed fan. Verify the
wind speed is not reading 0.0.
3.
Verify proper operation of in/outdoor temperature.
Verify the indoor and outdoor temperature match closely with
the console and sensor array in the same location (about 5 to
Summary of Contents for WS0835
Page 51: ...51...
